MAIN FEATURES

Loss Angle Meter & Million Megohm Meter is given in one cabinet.
Measure Dielectric Constant Loss Angle & Resistivity of insulation oil as per IS: 6103-1971, IS: 6292-1971 and IS: 335-1972.
The system comprises of:
- 1. OIL TEST SYSTEM, MODEL OTS2K1
- 2. Three Terminal Oil Test Cell (Stainless Steel : SS 316)
- 3. Heating Chamber for three terminal oil test cell with protection device, thermostat & temperature indicator.
- 4. Standard Capacitor for calibration of MLO-1D (Optional)
- 5. Standard High Megohm Resistor Card for calibration of LS-3B (Optional)

Technical Features

OIL TEST SYSTEM MODEL : OTS 2K1
Loss Angle Ranges	I] 19.99 % FSD with a resolution of 0.01% II] 199.9 % FSD with a resolution of 0.1 % Note : Reading on 199.9 % range are linear upto 20 % thereafter correction chart for tan d to be used..
Dielectric Constant Meter	0.10 to 10.00
Trip Current	0.10 to 10.00
Test Voltage	0 – 600 VAC continuously variable or as ordered With resolution of 1Volts
Resistance Range	10 meg to 109 meg in 7 range which together with Siva three terminal oil cell measures the resistivity of the order of 62000 x 1012 ohm-cm.
Test Voltage	+ 500 V DC with 0.1% stability. The power supply is fully protected against accidental short circuit.
Timer	10 sec to 60 sec.
Test Voltage	0 - 3 Kv AC/4.5 Kv DC.
Indication	3 ½ digit panel meter for tan d %, Null, IR, AC & DC Voltage.
Accuracy Tan d %	± 1 % of the reading ± 2 digits.
Accuracy IR	± 2 % ± 1 digits of fsd for first four ranges ± 4 % ± 1 digits of fsd for last four ranges.
Warm Up time	5 minutes.
Dimensions	420 x 270 x 220 mm.
Weight	9 Kg (approx).