MAIN FEATURES

The C Bridge LSO-9D uses four armed bridge and takes current in proportion to the value of C to be measured which develops proportional voltage in the secondary of CT which is balanced out by the drop across the resistor branch required for nulling is measured to read capacitance.
The instrument has a range of 0.1mfd to 1000mfd in three ranges, and the test voltage in 200VAC to 600VAC.
The LSO-9D can be coupled with Loss Factor Meter Model LPO-5D/5MD, test station and power source to have simultaneous measurement of C & Tan d.

Technical Features

Capacitance Range	0.1 to 1000mfd in three ranges of 19.99, 199.9 & 1999mfd FSD.
Resolution	0.1mfd 19.99mfd FSD ±1 digit.
Accuracy	±0.5% of FSD ±1 digit
Indication	3 ½ digit panel meter
Test Voltage	Any voltage from 200VAC to 600VAC applied by external source
Balancing	By two controls ‘POT’& Indication on 3 ½ Panel Meter. Balancing action by bringing the meter to read minimum.
Warm up time	1 minutes
Power Supply	230VAC ±15%, 50Hz
Weight	Less than 15Kgs
Dimensions	500 X 300 X 200mm