MAIN FEATURES OF Automatic Cable Test System

Fully auto operation
Non editable data saving and retrieving. Accurate detailed/non detailed /Brief reports.
Siva cable test system has in built calibration standards which are automatically compared before each test. Works continuously in harsh climatic conditions.
Precise bridges capable of measuring resistance, capacitance & capacitance unbalance.
Accurate selective level meters and level oscillators for HF db measurements.
A unique real time Bar Graph display facility on monitor while testing is in progress.
Affordable price even for smaller cable manufacturing units.

Technical Features

Parameter	Range	Units	Accuracy of Reading	Comments
Conductor Resistance	0.0 to 100.0 0 to 1000 0 to 10 K	ohms ohms kohms	±0.1%rdg±0.05 range ±0.1%rdg±0.05%of range ±0.1%rdg±0.05%of range	4 Terminal (Wire) DC Measurement corrected to 20°C
Loop Resistance	Calculate from conductor resistance (Ra+Rb)
Mutual Capacitance	0.00 to 10.00 0.00 to 100.00 0.00 to 1000	nF nF nF	±0.5%rdg±0.05%of range ±0.5%rdg±0.05%of range ±0.5%rdg±0.05%of range	Bridge Method 1KHz/800 Hz.
Capacitance Unbalance Pair to Ground (CUPG) Pair to Pair (CUPP) (For CUPP : within quad & quad to quad).	0.000 to ± 1.999 0.000 to ± 19.99 0.000 to ± 1.999 0.000 to ± 19.99	nF nF nF nF	±2%rdg±0.3% of range ±2%rdg±0.3% of range ±1.5%rdg±2pF ±1.5%rdg±0.3% of range	Bridge Method 1KHz /800Hz.
Attenuation At 150KHz	0.1 to 20 20 to 50 50 to 80	dB dB dB	±0.3dB ±0.8dB ±1.2dB	Balanced System Termination
Atn @ 800Hz Atn @ 5KHz Atn @ 21KHz	Derived from LF parameters.
CROSS TALK (NEXT/FEXT) @ 800KHz, @ 500KHz, @ 21KHz, @150KHz	20 to 50 50 to 801 80 to 95	dB dB dB	±0.8dB ±1.2dB ±3dB	Standard Measurement Frequency 150KHz
CHARACTERISTIC IMPEDANCE @800Hz, 5KHz, 21KHz)	Derived from LF parameters.

MAIN FEATURES OF Automatic Cable Test System