LSO9D
- The C Bridge LSO-9D uses four armed bridge and takes current in proportion to the value of C to be measured which develops proportional voltage in the secondary of CT which is balanced out by the drop across the resistor branch required for nulling is measured to read capacitance.
- The instrument has a range of 0.1mfd to 1000mfd in three ranges, and the test voltage in 200VAC to 600VAC.
- The LSO-9D can be coupled with Loss Factor Meter Model LPO-5D/5MD, test station and power source to have simultaneous measurement of C & Tan d.
| Technical Features | |
|---|---|
|
Capacitance Range
|
0.1 to 1000mfd in three ranges of 19.99, 199.9 & 1999mfd FSD. |
|
Resolution
|
0.1mfd 19.99mfd FSD ±1 digit. |
|
Accuracy |
±0.5% of FSD ±1 digit |
|
Indication
|
3 ½ digit panel meter
|
|
Test Voltage |
Any voltage from 200VAC to 600VAC applied by external source |
|
Balancing |
By two controls ‘POT’& Indication on 3 ½ Panel Meter. Balancing action by bringing the meter to read minimum. |
|
Warm up time
|
1 minutes
|
|
Power |
230VAC ±15%, 50Hz |
|
Dimensions
|
500 X 300 X 200mm |
|
Weight
|
Less than 15Kgs |