LS3C
- Push Button Controls for Rapid Testing
- Tests as per I.S.I. recommendations.
- Wide Measurement Range.
- Fully protected against all overload and Short-circuits.
- Completely Solid State Circuitry, hence drift free operation.
- Guard terminal provided.
- Suitable for TESTING earthed samples.
- Suitable for TESTING insulation liquids (Resistivity Measurements) with oil cell as per IS:335.
| Technical Features | ||
|---|---|---|
|
Test Voltage |
Multiple Fixed DC voltages are provided 100, 250, 500 & 1000 Volt DC. |
|
|
|
Setting Accuracy |
±2% |
|
|
Stability |
Short term stability better than 0.001%. |
|
|
Indication |
On the same meter by ‘Press to measure’ push button. |
|
Calibration |
Basic calibration at 500V. for other voltages multiply by Test Voltage/500. |
|
|
Resistance |
Range |
Accuracy |
|
|
10Meg –1000 x 106 Meg at 500V in 7 Ranges. |
±2% at center of the scale upto 102 multiplier.
±5% at the center of the scale for next two ranges. ±10% at the center of scale on last two ranges. |
|
Leakage Current |
Range |
Accuracy |
|
|
50 x 10-6 A to 50 x 10-12 FSD in 7 ranges. |
Same as Resistance or better. |
|
Indications |
4 ½” Taut Band Panel Meter for resistance Lc & Voltage |
|
|
Warm Up Time |
1 minute |
|
|
Power Supply |
230VAC ±15%, 50Hz |
|