LC02
- Uses a low level (1 kHz) test signal.
- Bridge principle for measuring percentage deviation.
- Phase detector used, to measure tand for capacitors.
- Four ranges of 1% , 2.5% , 10% & 20% FSD and single range of 1% (0.01) FSD for tan D is provided
- Fast electronic GO-N0-G0 system with visual indication.
- Speed of 1500 components/hour.
- Fully solid state using latest integrated circuits.
- Immune to short circuits, wrong selection of ranges , voltage fluctuations & other type of mishandling .
| Technical Features | |||
|---|---|---|---|
|
Test Voltage |
1 VAC approx. |
|
|
|
Test Frequency |
1 kHz |
|
|
|
Component Range |
Test Frequency |
Range |
|
|
|
1 KHz |
R – 5 ohm to 20 m ohm |
|
|
|
1KHz |
C – 100 pF to 10 Mfd
|
|
|
|
1KHz |
L – 2 mH to 100H |
|
|
|
100 Hz |
R – 5 ohm to 20 m ohm |
|
|
|
100Hz |
C – 1000 pF to 100 Mfd |
|
|
|
100 Hz |
L – 20 mH to 1000 H |
|
|
|
10 KHz |
R – 5 ohm to 20 m ohm |
|
|
|
10 KHz |
C – 10 pF to 1 Mfd |
|
|
|
10 KHz |
L – 0.2 mH to 10 H |
|
|
Tolerance |
F.S.D. |
Resolution |
Accuracy |
|
|
± 1% |
0.02% |
± 1% ± Resolution |
|
|
± 2.5% |
0.05% |
± 1% ± Resolution |
|
|
± 10% |
0.4% |
± 1% ± Resolution |
|
|
± 20% |
1.0% |
± 1% ± Resolution |
|
Tolerance Range |
120 mm Taut Band Meter |
|
|
|
Tan D |
Range |
1% F.S.D. (0.01) |
|
|
|
Resolution |
0.02% (0.0002) |
|
|
|
Accuracy |
±1 % of ± Resolution |
|
|
|
Indication |
100 mm Taut Band Meter |
|
|
Power supply |
230 VAC ± 15% , 50 Hz , Single Phase. |
|
|
|
GO-NOGO |
|
A 3 lamp electronic go-nogo indication for faster sorting with facility for individually setting –LIMIT, + LIMIT for deviation & upper limit for tan d. |
|