• 1. Operating Voltage : Mains 230VAC ±10%, 50Hz Single Phase

  • 2. Test Voltage : AC – 10V to 500V Settable. DC – 500V Settable in 100V Steps
    • a) Accuracy : ± 1%
    • b) Resolution : 0. 1V

  • 3. Capacitance Range :1pf to 10000pF
    • a) Resolution : 0.01pf
    • b) Accuracy : 0.5% ± 1pF

  • 4. Dielectric Constant Range : 1 To 100
    • b) Accuracy : ±0.5%

  • 5. Dissipation factor (Tan delta):0 to 100%
    • a) Resolution : 1 X 10e-5 (0.001%)
    • b) Accuracy : ±1% ± 2 X 10e-4

  • 6. Insulation Resistance :1M Ω to 100TΩ
    • a) Accuracy : ±1% up to 1Gega and±2% above 1Gega

  • 7. Volume & Surface Resistivity : Max up to 10e17 Ohm cm
  • 1. No Balancing and Calculation required to calculate Volume / Surface Resistivity and Dielectric Constant.
  • 2. Complies IEC 60250, IS 4487, Test jig Conform to ASTMD 257.
  • 3.Built in Thermal Printer.
  • 4. Serial port RS232 for data downloading.
  • 5. Can be used to check liquid sample with Three Terminal oil cell.
  • 6. Storage 100 Test reports.

Automatic Dielectric Constant,Tan delta and Resistivity Meter Model :CTRM-1

Solid Insulator Automatic Capacitance