MAIN FEATURES

Fully auto operation, No balancing is required. Suitable for 765 KV yards.
Measures and displays turn ratio Phase angle, Vector group, Excitation current, Polarity, Pass/Fail for ratio reading with calculated Ratio.
4 line 20 character backlit LCD.
Automatic Vector Group Detection.
RS232 Port to down load data to PC & Remote operation.
Inbuilt Memory for 100 test results.
Resolution of 0.001 in the range 10.
Can be used to measure 3,1 phase delta, star connected transformer.
Can be used for Without neutral and Zigzag Transformer.
Polarity Detection.
Fully protected against any wrong connections.
Built in Thermal Printer for on-site printouts.
Temperature Range 0 to 55°C
Humidity 5% to 90% RH, Non condensing.

Technical Features

POWER SUPPLY	230V AC ± 10%, 50Hz ± 5%.
VOLTAGE	8V / 40V / 80V AC Selectable
RATIO RANGE	0.8 to 12000 (15K Optional)
RATIO ACCURACY	± 0.1% ± 2digits
INDICATION	5 Digit LCD display of ratio.
LCD DISPLAY	4line x 20 Characters alphanumeric controlled by processor for interfacing with keyboard.
PHASE ANGLE	± 90 degrees Resolution:0.01°
RESOLUTION	0.01
ACCURACY	± 0.1 degree ± 2digits
EXCITATION CURRENT	1mA – 0.1A at 8V
ACCURACY	± 1mA
RESOLUTION	0.1mA
STORAGE	Built in upto 100 test results.
PORT	RS232 PORT
SOFTWARE	Windows Based.
PROTECTION	Short circuit, Over load, Transient Surge, Induction voltage.
OPERATING TEMP.	0° C TO 55° C.
THREE PHASE TEST CABLES	15 meter long.
POWER SUPPLY CORD	10 meter
GROUND CABLE	10 meter.
INSTRUCTION MANUAL	English 1No.
CALIBRATION CERTIFICATE	Traceable to STQC Lab.
SAFETY SPECIFICATIONS	IEC 61010 COMPLIED.
EMI/EMC SPECIFICATIONS	IEC/EN 61326 COMPLIED.
VIBRATION TEST	IEC60068-2-6 COMPLIED.
SHOCK TEST	IEC60068-2-27 COMPLIED.
BUMP TEST	IEC60068-2-29 COMPLIED.
DAMP HEAT TEST	IEC60068-2-78 COMPLIED

MAIN FEATURES